Fire hits Baldia Town factory in Karachi; no casualties reported

A large blaze tore through a multi-unit factory in Rashidabad, Baldia Town, on Tuesday, prompting a major firefighting operation. Officials say no casualties have been reported, while the cause is disputed and the Sindh chief minister has sought a full report.

Fire hits Baldia Town factory in Karachi; no casualties reported
Image: Ktownboy103 / Wikimedia Commons, CC0
At a glance
  • Fire broke out around 11am at a factory in Rashidabad, Baldia Town, Karachi
  • Eight fire engines and a snorkel vehicle were deployed; no casualties reported so far
  • Officials said 60 to 70 per cent of the blaze had been brought under control
  • The Sindh chief minister ordered a report on the cause and the factory's safety arrangements

A major fire broke out at a factory in Rashidabad, Baldia Town, Karachi, on Tuesday, setting off a large emergency operation. Officials say no casualties have been reported so far.

The Baldia Town factory fire began on the ground floor and spread to other parts of the building. Rescue officials said it started at around 11am, and firefighters surrounded the premises to stop the flames reaching neighbouring factories.

8
fire engines deployed, along with a snorkel vehicle
60-70%
of the blaze reported under control, according to officials
1,000 sq yd
area of the factory premises
0
casualties reported so far

Emergency response at the Baldia Town factory fire

According to rescue officials, eight fire engines and a snorkel vehicle were sent to the site. Chief Fire Officer Humayun Saeed said crews were tackling the flames from all four sides and had cleared the ground floor, while work continued to put out the remaining fire.

Saeed said around 70 per cent of the blaze had been brought under control and hoped it would be fully extinguished within 30 minutes to an hour. Keamari SSP Singhar Malik gave a slightly lower estimate of approximately 60 per cent.

Malik and Deputy Commissioner Keamari Sattar Hakro visited the site to review the firefighting and rescue work, and the SSP gave instructions to personnel on duty. Malik said district police and administration officials arrived shortly after being informed, and that rescue agencies and fire brigade teams were called in.

baldia town factory fire: Key numbers
baldia town factory fire: Key numbers

Oil spill and safety precautions

The SSP said oil had spilt from a storage tank inside the factory, raising concerns about a possible secondary incident. Police cordoned off the area and moved people away from the scene as a precaution, which also made it easier for rescue teams to work.

Malik said firefighters had succeeded in preventing the fire from spreading to nearby factories. According to Saeed, an oil tanker was being emptied inside the premises when the fire erupted, and the vehicle was still inside the factory as the operation continued.

Dispute over the cause

Rescue officials initially spoke of a reported boiler explosion on the ground floor. The chief fire officer rejected this, saying there was no boiler inside the factory.

Saeed said the interior had been thoroughly inspected after the firefighting operation and no boiler was found anywhere on the premises. He said the fire broke out while oil was being refilled from the tanker.

No official finding on the cause has been announced. The competing accounts leave the matter to the assessment ordered by the provincial government.

baldia town factory fire: At a glance
baldia town factory fire: At a glance

A large, mixed-use building

Saeed said the factory covers 1,000 square yards. Besides the unit making glass marbles (kanchay), it also housed units producing garments, shoes and electrical panels.

Earlier accounts from rescue officials described a food manufacturing unit alongside a garments factory, and noted concern that the fire could spread to adjoining sections.

The chief fire officer said the intensity of the blaze suggested the building did not have an adequate firefighting system.

Chief minister seeks report

Sindh Chief Minister Murad Ali Shah took notice of the incident. He directed the fire brigade and rescue agencies to use all available resources, and ordered additional fire tenders and personnel to be deployed.

He called for rescue operations to be expedited and told the relevant departments to ensure the safety of people at the site. He also sought an assessment of the cause of the fire and of the factory's safety arrangements, and ordered the authorities to submit a comprehensive report.

What happens next

Firefighters are working to extinguish the remaining flames, which the chief fire officer hoped would be done within 30 minutes to an hour. The chief minister has ordered a comprehensive report on the cause of the fire and the factory's safety arrangements.

baldia town factory fire: Quick answers
baldia town factory fire: Quick answers

Questions and answers

Were there any casualties in the Baldia Town factory fire?

According to Keamari SSP Singhar Malik, no casualties had been reported so far.

What caused the fire?

The cause has not been officially determined. The chief fire officer said the fire broke out while oil was being emptied from a tanker and rejected reports of a boiler explosion, saying no boiler was found on the premises.

How much of the fire was brought under control?

The chief fire officer said around 70 per cent of the blaze was under control, while the SSP put the figure at approximately 60 per cent.

Image: Ktownboy103 / Wikimedia Commons, CC0

Was this useful?Report an error
Share this storyWhatsAppFacebookXLinkedIn

More on National

View all →